ZHIYUN CRANE 2 GIMBAL STABILIZER INCL. FOLLOW FOCUS
Zhiyun Crane 2
Advanced 3-axis gimbal (hand held camera stabilizer) for video recording. Can be used with most system cameras on the market, both DSLR and mirrorless models.
Equipped with follow focus function (Canon only) and control panel for adjusting various camera functions. An OLED screen provides clear and easy to read information about camera and gimbal settings. Zhiyun Crane 2 has 18 hours of operation time and can handle a maximum load (camera + lens) of 3.2 kg.
Control focus and camera settings
Zhiyun Crane 2 is the world's first 3-axis stabilizer with built-in follow-focus function for Canon (Note: No other brands). The camera is connected with a cable to the stabilizer, and a control wheel on the side allows you to quickly and easily adjust the focus in three levels with very high precision (down to ± 0.02°).
An innovative control panel consisting of a four-way multifunction button and a quick control dial also provides Crane 2 capability to adjust camera functions such as aperture, shutter speed, ISO and exposure compensation. The same controls are also used to adjust the stabilizer itself. The settings are clearly displayed on an OLED screen. It also shows the stabilizer's battery level.
Stronger, more efficient, faster
A new motor design gives 50% more power than previous models, which means that the Zhiyun Crane 2 can carry a total weight of 3.2kg (camera plus lens). At the same time, updated algorithms provide a 100% improvement in response time, which means smooth and stable recordings even under difficult conditions. Crane 2 can compensate for a tilt angle between -135° and + 185°, as well as unlimited panning and roll (360 °).
The built-in rechargeable batteries have a total capacity of 6000 mAh and can provide up to 18 hours of continuous use. You can even charge some of Sony's mirrorless camera models via Crane 2 (power cable included).
When the stabilizer is turned off, a slow-fall system activates and lands your camera nice and steady to avoid a sudden drop that could otherwise harm your equipment. The same thing applies if the battery suddenly runs out of juice.
By using a professional quick release plate (Manfrotto 501 type, included) the camera is easily and securely mounted on the Crane 2.
Key features of Zhiyun Crane 2
- 3-way motorized image stabilization, capable of up to 3.2 kg pay load
- Built-in, high precision follow focus control. NOTE: For Canon only
- Control panel with a four-way multifunction button and quick control dial
- OLED screen showing important camera and gimbal settings
- 18 hours of operation time with built-in rechargeable batteries
- Real-time camera charging (compatible with some of Sony's mirrorless models)
- Manfrotto 501 type quick release mount
1 x Zhiyun Crane 2 camera stabilizer (gimbal)
1 x Mechanical Follow Focus
1 x Tripod (made of aluminum alloy)
1 x Battery Charger
3 x Li-ion batteries (type 18650)
1 x USB Cable (micro-B to micro-B)
1 x USB cable (micro-B to mini-B)
1 x Sony Control and Charging Cable
1 x Panasonic Control and Charging Cable
1 x Micro USB Cable
1 x User Manual (English)
1 x Shoulder Strap
1 x Carrying Case
Type: 3-axis system camera stabilization (gimbal)
Tilt Angle Range: -135 - + 185 °
Pan Angle Range: 360 ° (unlimited)
Roll Angle Range: 360 ° (unlimited)
Deviation in Static State: +/- 0.01-0.03 °
Deviation in Motion State: +/- 0.05-0.1 °
Recommended Pay Load: 0.5-3.2 kg
Operating time per charge: 12-18 hours
Operating voltage: 9.8-12.6 V
Battery Type: Lithium Ion Battery 18650 (x3)
Charging Time: 2.5 hours
USB Output: Yes. 5V, 1A
Charging Output: 8V, 2A
Temperature Range: -10 - + 45 ° C
Dimensions: 210 x 118 x 450 mm
Weight: 1250 g
Motorized Follow Focus unit for Zhiyun Crane 2, compatible with all DSLR and mirrorless system cameras from Canon, Nikon, Sony and Panasonic.
Connect it to your Crane 2 via micro USB and use the gimbal's follow focus wheel to comfortably adjust focus in real time with high precision. Easy to mount and ready for use within 60 seconds.
- Supports real time focus with Zhiyun Crane 2 for all DSLR and mirroless cameras
- Quick installation, ready for use within 60 seconds
- Clear system status indicator with colored lights
Gear: 0.8 Module, 24 Teeth
Compatible Stabilizer: Zhiyun Crane 2
Battery: Built-in Li-ion Battery, 300mAh
Charging: 5V, 1500mA
Charging Time: 0.5h
Size: 85 x 46 x 35.5mm